Images are examples, some edited with AI. The technical data are authoritative. AI notice
Bus module CPX-E series PROFIBUS DP IP20 CPX-E-PB - Festo 4080496
Festo bus module CPX-E-PB at a glance: fieldbus PROFIBUS DP, fieldbus interface PROFIBUS, degree of protection IP20. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
As part of the CPX-E series, the module extends the periphery of a controller with additional channels. Type CPX-E-PB, part number 4080496.
Benefits
- Fieldbus PROFIBUS DP
- Fieldbus interface PROFIBUS
- Degree of protection IP20
- Grid dimension 18.9 mm
- Ambient temperature -5 to 50 °C
- Dimensions 42.2 mm x 125.8 mm x 76.5 mm
Applications
Used in automation solutions based on the Festo CPX-E series. Ambient temperature -5 to 50 °C, protection IP20.
Technical data
| Feature | Value |
|---|---|
| Type | CPX-E-PB |
| Festo part number | 4080496 |
| Dimensions (W x L x H) | 42.2 mm x 125.8 mm x 76.5 mm |
| Grid dimension | 18.9 mm |
| Diagnostics via LED | force mode, bus error, power supply electronics/sensors, power supply load, system error |
| Diagnostics via bus | undervoltage, requested function not supported, wire break, short circuit, not ready for data exchange, parameterisation error, buffer overflow, upper limit not met, transmission error, lower limit not met, watchdog/I/O status |
| Module parameters | undervoltage diagnostics, process value representation analogue modules |
| Power supply, connection type | Terminal strip |
| Power supply, connection system | Spring-loaded terminal |
| Power supply, number of pins/wires | 4 |
| Power supply, conductor diameter | 0.2 to 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Approval | RCM |
| CE mark (see declaration of conformity) | to EU EMC Directive |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Protection against direct and indirect contact | protective extra-low voltage (PELV) |
| Degree of protection | IP20 |
| Ambient temperature | -5 to 50 °C |
| Note on ambient temperature | -5 - 60 °C for vertical installation |
| Max address volume outputs | 64 Byte |
| Type of mounting | via DIN rail |
| Note on materials | contains paint-wetting impairment substances (LABS), RoHS compliant |
| Material housing | PA |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | typical 75 mA |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Max address volume inputs | 64 Byte |
| Power failure bridging | 20 ms |
| Configuration support | GSD file |
| Maximum number of modules | 10 |
| System parameters | force mode, diagnostic memory, failsafe response, system start |
| Operator controls | DIL switch |
| Maximum power supply | 8 A |
| Power supply, function | Electronic system and sensors |
| Note on outputs | 62 byte with I/O diagnostic interface, 64 byte without diagnostics, 64 byte with status bits |
| Note on inputs | 62 byte with I/O diagnostic interface, 63 byte with status bits, 64 byte without diagnostics |
| Fieldbus interface, galvanic isolation | Yes |
| Field bus interface, transmission rate | 9.6 kbit/s, 19.2 kbit/s, 93.75 kbit/s, 187.5 kbit/s, 500 kbit/s, 1.5 Mbit/s, 3 Mbit/s, 6 Mbit/s, 12 Mbit/s |
| Fieldbus interface | PROFIBUS |
| Field bus, connection type | Socket |
| Field bus, connection system | Sub-D |
| Field bus, connection pattern | 9 |
| Field bus, protocol | PROFIBUS DP |
| Fieldbus interface, max address volume inputs | 64 Byte |
| Fieldbus interface, max address volume outputs | 64 Byte |
| Service interface, function | diagnostics and parameterisation |
| Service interface, connection type | Socket |
| Service interface, connection technology | USB 2.0 type B mini |
| Service interface, number of pins/wires | 5 |
| Note on fieldbus interface | Optional connection technology with accessories:, Plug/socket M12x1 B-coded, 5-pin, IP65 protection |
| Weight (price list) | 0.22 kg |
| Weight | 0.22 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-E-PB |
| EAN | 4052568291167 |
| Zolltarifnummer | 85176200 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Operating conditions | EN 60068-2-27, EN 60068-2-6 |
| Series | CPX |
| Protection rating | IP20 |
| Temperature (max.) | 50 |
Downloads
Accessories
Bus module CPX-E series IP20 control technology CPX-E-EP - Festo 4080499
Item FES-4080499Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





