Images are examples, some edited with AI. The technical data are authoritative. AI notice

Analogue input module 4 inputs IP20 CPX-E-4AI-U-I - Festo 4080493

Festo ✓ Original product Brand new

Festo analogue input module CPX-E-4AI-U-I at a glance: 4 inputs, degree of protection IP20, grid dimension 18.9 mm. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.

Net
€345.26
excl. VAT
Item FES-4080493
Manufacturer no. CPX-E-4AI-U-I

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The CPX-E-4AI-U-I belongs to the Festo CPX-E series. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.

Benefits

  • 4 inputs
  • Degree of protection IP20
  • Grid dimension 18.9 mm
  • Signal range -10 - 10 V and more
  • Ambient temperature -5 to 50 °C
  • Dimensions 18.9 mm x 76.6 mm x 124.3 mm

Applications

Used in automation solutions based on the Festo CPX-E series. Ambient temperature -5 to 50 °C, protection IP20.

Technical data

FeatureValue
TypeCPX-E-4AI-U-I
Festo part number4080493
Dimensions (W x L x H)18.9 mm x 76.6 mm x 124.3 mm
Grid dimension18.9 mm
Diagnostics via LEDerror per channel, error per module
Diagnostics via buswire break, short circuit/overload sensor supply, parameter error, parameterisation error, overload analogue inputs, upper limit not met, underflow/overflow, lower limit not met
Module parametersdata format analogue inputs, short circuit diagnostics sensor supply, parameterisation error diagnostics, overload diagnostics analogue inputs, hysteresis limit monitoring, deactivate sensor supply, behaviour after overload analogue inputs, behaviour after short circuit/overload
Channel parameterswire break diagnostics, upper limit diagnostics, parameter error diagnostics, lower limit diagnostics, underflow/overflow diagnostics, smoothing factor, signal range per channel, Lower/upper limits
Fuse protection (short circuit)Internal electronic fuse per module
Isolation channel - internal busYes
Isolation channel - channelNo
ApprovalRCM
CE mark (see declaration of conformity)to EU EMC Directive
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - no corrosion stress
Storage temperature-20 to 70 °C
Relative air humidity95%, Non-condensing
Degree of protectionIP20
Ambient temperature-5 to 50 °C
Note on ambient temperature-5 - 60 °C for vertical installation
Type of mountingvia DIN rail
Note on materialscontains paint-wetting impairment substances (LABS), RoHS compliant
Material housingPA
Number of inputs4
Maximum residual current of inputs per module1.4 A
Nominal DC operating voltage, electronics/sensors24 V
Permissible voltage fluctuations for electronics/sensors± 25 %
Max address volume inputs8 Byte
Electrical connection input, functionAnalogue input
Electrical connection input, connection type4x terminal strip
Electrical connection input, connector systemSpring-loaded terminal
Electrical connection input, number of connections/cores4
Electrical connection for input, conductor cross section0.2 to 1.5 mm²
Electrical connection for input, note on conductor cross section0.2 - 2.5 mm² for flexible conductors without wire ferrule
Measured variableVoltage, Current
Repetition accuracy±0.1 % at 25 °C
Operating error limit related to the ambient temperature range±0.3 %
Basic error limit at 25 °C±0.2 %
Power failure bridging10 ms
Analog input-10 - 10 V, -20 - 20 mA, -5 - 5 V, 0 - 10 V, 0 - 20 mA, 1 - 5 V, 4 - 20 mA
Data format15 bits + prefix, Linear scaling
Maximum cable length30 m, Shielded
Electrical connection input 2, functionfunctional earth
Electrical connection input 2, connection typeTerminal strip
Electrical connection input 2, connection technologySpring-loaded terminal
Electrical connection input 2, number of pins/wires4
Electrical connection input 2, pin allocation00995842
Electrical connection input 2, conductor cross-section0.2 to 1.5 mm²
Electrical connection input 2, note on conductor cross-section0.2 - 2.5 mm² for flexible conductors without wire ferrule
Weight (price list)0.11 kg
Weight0.11 kg
ManufacturerFesto
Hersteller-NrCPX-E-4AI-U-I
EAN4052568291136
Zolltarifnummer85389099
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialPolyamide (PA)
Operating conditionsEN 60068-2-27, EN 60068-2-6
SeriesCPX
Protection ratingIP20
Temperature (max.)50

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.