Images are examples, some edited with AI. The technical data are authoritative. AI notice
IO-Link master module CPX-E series IP20 CPX-E-4IOL - Festo 4080495
Festo IO-Link master module CPX-E-4IOL at a glance: 4 IO-Link ports, fieldbus IO-Link, degree of protection IP20. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CPX-E-4IOL belongs to the Festo CPX-E series. As part of the CPX-E series, the module extends the periphery of a controller with additional channels.
Benefits
- 4 IO-Link ports
- Fieldbus IO-Link
- Degree of protection IP20
- Grid dimension 18.9 mm
- Ambient temperature -5 to 50 °C
- Dimensions 18.9 mm x 76.6 mm x 124.3 mm
Applications
Used in automation solutions based on the Festo CPX-E series. Ambient temperature -5 to 50 °C, protection IP20.
Technical data
| Feature | Value |
|---|---|
| Type | CPX-E-4IOL |
| Festo part number | 4080495 |
| Dimensions (W x L x H) | 18.9 mm x 76.6 mm x 124.3 mm |
| Grid dimension | 18.9 mm |
| Diagnostics via LED | Errors per module, Status per channel |
| Diagnostics via bus | undervoltage, general error, device missing/failed, wire break, module error, short circuit, parameter error, underflow/overflow |
| Module parameters | short circuit diagnostics actuator supply, deactivate sensor supply, behaviour after short circuit/overload |
| Channel parameters | deactivate actuator supply, device error code, force channel x, channel mode, channel status, cycle time |
| Fuse protection (short circuit) | internal electronic fuse, load per channel, internal electronic fuse, sensor per module |
| Intrinsic current consumption at nominal operating voltage load | typical 15 mA |
| Nominal operating voltage DC outputs | 24 V |
| Isolation channel - internal bus | No |
| Isolation channel - channel | No |
| Permissible voltage fluctuations outputs | ± 25 % |
| Power supply, connection type | Terminal strip |
| Power supply, connection system | Spring-loaded terminal |
| Power supply, number of pins/wires | 4 |
| Power supply, conductor diameter | 0.2 to 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Approval | RCM |
| CE mark (see declaration of conformity) | to EU EMC Directive |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Protection against direct and indirect contact | protective extra-low voltage (PELV) |
| Degree of protection | IP20 |
| Ambient temperature | -5 to 50 °C |
| Note on ambient temperature | -5 - 50 °C with horizontal installation |
| Type of mounting | via DIN rail |
| Note on materials | contains paint-wetting impairment substances (LABS), RoHS compliant |
| Material housing | PA |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | typical 50 mA |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Protocol | IO-Link |
| IO-Link, protocol | master V 1.1 |
| IO-Link, communication mode | Configurable via software, SIO, COM1 (4.8 kB), COM2 (38.4 kBaud), COM3 (230.4 kBaud) |
| IO-Link, port type | B |
| IO-Link, Number of ports | 4 |
| IO-Link, Process data length OUT | configurable 8 - 32 byte |
| IO-Link, Process data length IN | configurable 8 - 32 byte |
| IO-Link, Min. cycle time | Dependent on minimum supported cycle time of the connected IO-Link device |
| IO-Link, communication | C/Q LED green |
| Electrical connection for IO-Link, connection type | 4x terminal strip |
| Electrical connection for IO-Link, connection technology | Spring-loaded terminal |
| Electrical connection for IO-Link, number of pins/wires | 6 |
| Electrical connection IO-Link, conductor cross-section | 0.2 to 1.5 mm² |
| Electrical connection IO-Link, note on conductor cross-section | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Weight (price list) | 0.105 kg |
| Weight | 0.105 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-E-4IOL |
| EAN | 4052568291150 |
| Zolltarifnummer | 85389099 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Operating conditions | EN 60068-2-27, EN 60068-2-6 |
| Series | CPX |
| Protection rating | IP20 |
| Temperature (max.) | 50 |
Downloads
Accessories
Bus module CPX-E series IP20 control technology CPX-E-PN - Festo 4080497
Item FES-4080497Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





