5/3-way solenoid valve, exhaust centre, G 1/8, 490 l/min, 12 V DC, standard connector - YPC SF2403

The SF2403 drives a double-acting cylinder in both directions, and in the centre position both cylinder chambers vent to exhaust. The supply port is then blocked, the piston carries no force and can be moved by hand. At 12 V DC it runs on vehicle electrical systems and battery-powered equipment. At 5 bar up to 490 l/min pass through the G 1/8 ports.

Advantages

• In the centre position both working ports are vented, so the actuator is depressurised and free to move.
• Only 2.5 W power consumption per coil, coil without polarity and insulation class F.
• Switching time of 35 ms max. at 5 bar and up to 3 Hz switching frequency for short machine cycles.
• 18 mm body width and a 15 mm coil, so several valves can sit close together.

Applications

• Actuators that have to be depressurised on a fault so that trapped parts can be freed.
• Setting up and adjusting fixtures where the piston is moved by hand.
• Vehicle bodies and mobile equipment with a 12 V supply.

Accessories and spare parts

The replacement solenoid coil, type L for 12 V DC, is available separately. The valve uses two of them. Several valves can be combined on an SF2000 series manifold with 2 to 14 stations, with supply and exhaust ports in size 1/4.