5/3-way solenoid valve, exhaust centre, G 1/8, 490 l/min, 115 V AC, standard connector - YPC SF2403

The SF2403 drives a double-acting cylinder in both directions, and in the centre position both cylinder chambers vent to exhaust. The supply port is then blocked, the piston carries no force and can be moved by hand. At 5 bar up to 490 l/min pass through the G 1/8 ports. The 115 V AC coil fits control circuits that run from a 115 V control transformer.

Advantages

• In the centre position both working ports are vented, so the actuator is depressurised and free to move.
• Switching time of 35 ms max. at 5 bar and up to 3 Hz switching frequency for short machine cycles.
• 18 mm body width and a 15 mm coil, so several valves can sit close together.
• Oil-free operation, no lubrication required. If the air is oiled, use ISO VG32.
• Coil without polarity, insulation class F, removable, drawing 4.5 VA at 115 V AC.

Applications

• Actuators that have to be depressurised on a fault so that trapped parts can be freed.
• Setting up and adjusting fixtures where the piston is moved by hand.
• Machines with a 115 V control circuit, where the valve connects to the existing voltage without a converter.

Accessories and spare parts

The replacement solenoid coil, type L for 115 V AC, is available separately. The valve uses two of them. Several valves can be combined on an SF2000 series manifold with 2 to 14 stations, with supply and exhaust ports in size 1/4.