5/3-way solenoid valve, exhaust centre, G 1/4, 590 l/min, 12 V DC - YPC SF4403

Both coils off, both cylinder chambers vented: with this centre position the actuator sits pressure-free and force-free, which makes setup and manual release easier. Drawing 2.1 W per coil at 12 V DC, the valve suits equipment on a 12 V supply, such as mobile or battery-powered units. This pilot-operated spool valve from the SF4000 series moves 590 l/min through its G 1/4 ports.

Advantages

• Both working lines vented in the centre position, operating pressure 2 to 10 bar.
• Switching time max. 35 ms at 5 bar, up to 3 Hz switching frequency.
• Runs on non-lubricated air, use ISO VG32 oil if lubricated.
• IP65 with DIN connector, coil insulation class F.
• Non-polarised, removable coil with 2.1 W power consumption.

Applications

• Control circuits with pilot-operated check valves to hold position.
• Fixture setup without residual pressure in the cylinder.
• Actuators that must be pressure-free and movable by hand after an emergency stop.

Accessories and spare parts

A matching 12 V DC replacement coil is available separately, the valve carries two of them. For manifold mounting, YPC offers the MF4500 manifold base in the SF4000 series with 2 to 14 stations and common supply and exhaust ports.