3/2-way solenoid valve, spring return normally closed, G 1/8", 590 l/min, 24 V DC coil

The 3/2-way solenoid valve with spring return pressurises the working port while the coil is energised and vents it again through the G 1/8" exhaust port once the current is switched off. That makes it the matching control element for single-acting cylinders, pneumatic grippers and suction cups. A flow rate of 590 l/min covers small to medium volumes and the switching time stays below 25 ms at 5 bar. Housing and spool are made of aluminium, the seals of NBR and the pilot valve of glass-fibre reinforced polyamide. The 24 V DC coil draws only 2 W and is wired through a rectangular connector with LED, protective circuit and a 600 mm cable.

Advantages

• Flow rate of 590 l/min through ports sized G 1/8"
• Switching time below 25 ms at 5 bar for fast gripping and suction cycles
• Power consumption of 2 W allows direct switching from a 24 V DC controller
• Rectangular connector with LED indicator, protective circuit and 600 mm cable supplied
• Housing and spool in aluminium with seals made of NBR
• Operating pressure range of 1,5 to 10 bar at -10 to +60 °C

Applications

• Control of single-acting spring return cylinders in assembly stations
• Switching of vacuum cups and pneumatic grippers with cycles under 25 ms
• Blow-off stations and cleaning nozzles with an air demand up to 590 l/min
• Compact control blocks in small machines running on 24 V DC