Angled screw-in fitting POM, G 3/4 o., for hose exterior Ø 22 mm - Riegler 135961

Angled screw-in fitting POM, G 3/4 o., for hose exterior Ø 22 mm, working pressure -0.95 to 10 bar Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications. All our push-in fittings made of POM have the following approvals: drinking water DVGW, KTW, FDA and NSF. Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals. Please contact us for critical applications.

Standards and origin

• Customs tariff number: 39174000
• Country of origin: GB

About Male elbows

Elbow fittings take the line through 90 degrees and save space right at the cylinder or valve. Tube outside diameters from 4 to 12 mm are covered, with threads from M5 up to G 1/2 male.

What matters when choosing

• Identify the thread on the component first. Parallel threads run from M5 to G 1/2 male, tapered ones from R 1/8 to R 1/2 male, and female G 1/8, G 1/4 and G 1/2 are available as well.
• The hose sets the size. Outside diameters of 4 to 12 mm and inside diameters of 2 to 10 mm are listed, depending on whether the tube is pushed in or slid onto a barb.
• Material follows the medium and the surroundings. Nickel-plated brass and CW614N brass are the standard, POM, PA and polypropylene save weight, and stainless steel 1.4404, 1.4571 and PFA cover chemically demanding cases.
• Sealing material is a choice between NBR, silicone-free NBR and FKM (FPM). Silicone-free is mandatory wherever silicone contamination has to be ruled out in production.
• Maximum working pressure is given as 10 to 25 bar depending on design, operating pressure as 10 to 18 bar. For vacuum circuits the figures reach down to -0.98 bar.

Typical applications

• Connecting cylinders in tight positions where a straight fitting projects too far
• Manifolds and valve terminals inside control cabinets
• Grippers and handling axes with moving hose runs
• Vacuum circuits with suction cups working below atmospheric pressure
• Food and chemical environments where stainless steel or PFA is required

The group covers nickel-plated brass, CW614N brass, stainless steel 1.4404 and 1.4571, POM, PA, polypropylene and PFA, sealed with NBR, silicone-free NBR or FKM (FPM). The 163 items come from Italy, Germany, the United Kingdom and China.