Weld neck flange, DN 65, PN 6, pipe 76.1 mm, DIN 2631 and EN 1092-1 (type 11), black steel

The weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. The article is listed with a nominal size of DN 65. The stated figures are a pipe outside diameter of 76.1 mm and a flange outside diameter of 160 mm. This version is supplied with the version to DIN 2631 and EN 1092-1 (type 11) and 4 bolt holes.

Benefits

• Nominal size DN 65 at a nominal pressure of PN 6 to DIN 2631 and EN 1092-1 (type 11).
• Welding end of 76.1 mm outside diameter and 2.9 mm wall thickness.
• Flange outside diameter 160 mm on a bolt circle of 130 mm.
• 4 bolt holes of 14 mm diameter.
• Overall height 38 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

In plant that is opened often the DN 65 joint gives access to the line without touching the weld.

Standards and conformity

Dimensions and design follow DIN 2631 and EN 1092-1 (type 11) at a nominal pressure of PN 6.