Weld neck flange, DN 50, PN 6, pipe 60.3 mm, DIN 2631 and EN 1092-1 (type 11), black steel

Once installed, the weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. It is supplied with a pipe outside diameter of 60.3 mm and a flange outside diameter of 140 mm. The article is made of black steel. The version is listed with the version to DIN 2631 and EN 1092-1 (type 11) and 4 bolt holes.

Benefits

• Nominal size DN 50 at a nominal pressure of PN 6 to DIN 2631 and EN 1092-1 (type 11).
• Welding end of 60.3 mm outside diameter and 2.9 mm wall thickness.
• Flange outside diameter 140 mm on a bolt circle of 110 mm.
• 4 bolt holes of 14 mm diameter.
• Overall height 38 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

In plant that is opened often the DN 50 joint gives access to the line without touching the weld.

Standards and conformity

Dimensions and design follow DIN 2631 and EN 1092-1 (type 11) at a nominal pressure of PN 6.