Weld neck flange, DN 300, PN 10, pipe 323.9 mm, DIN 2632 and EN 1092-1 (type 11), black steel

As a weld neck flange the article carries the welded pipe run and creates a bolted joint that can be opened again. The data sheet gives a nominal size of DN 300. This version is listed with a pipe outside diameter of 323.9 mm and a flange outside diameter of 445 mm. Material black steel is listed for this version. Also stated are the version to DIN 2632 and EN 1092-1 (type 11) and 12 bolt holes.

Benefits

• Nominal size DN 300 at a nominal pressure of PN 10 to DIN 2632 and EN 1092-1 (type 11).
• Welding end of 323.9 mm outside diameter and 7.1 mm wall thickness.
• Flange outside diameter 445 mm on a bolt circle of 400 mm.
• 12 bolt holes of 22 mm diameter.
• Overall height 68 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

In pipework the flange is welded onto a pipe of 323.9 mm outside diameter and drawn together with 12 bolts.

Standards and conformity

The dimensions are based on DIN 2632 and EN 1092-1 (type 11) in the type 11 design with a formed hub.