Weld neck flange, DN 200, PN 16, pipe 219.1 mm, DIN 2633 and EN 1092-1 (type 11), black steel

The weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. In addition the sheet lists a nominal pressure of PN 16. Its rating is a nominal size of DN 200. The version is listed with the version to DIN 2633 and EN 1092-1 (type 11) and 12 bolt holes.

Benefits

• Nominal size DN 200 at a nominal pressure of PN 16 to DIN 2633 and EN 1092-1 (type 11).
• Welding end of 219.1 mm outside diameter and 5.9 mm wall thickness.
• Flange outside diameter 340 mm on a bolt circle of 295 mm.
• 12 bolt holes of 22 mm diameter.
• Overall height 62 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

On pumps and valves the bolt circle of 295 mm matches the counter flange to DIN 2633 and EN 1092-1 (type 11).

Standards and conformity

The version complies with DIN 2633 and EN 1092-1 (type 11), the bolt circle is 295 mm with 12 holes.