Weld neck flange, DN 10, PN 16, pipe 17.2 mm, DIN 2633, 1.4571

Once installed, the weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. The article is listed with a nominal size of DN 10. Material 1.4571 is listed for this version. Also stated are the version to DIN 2633 and 4 bolt holes.

Benefits

• Nominal size DN 10 at a nominal pressure of PN 16 to DIN 2633.
• Welding end of 17.2 mm outside diameter and 1.8 mm wall thickness.
• Flange outside diameter 90 mm on a bolt circle of 60 mm.
• 4 bolt holes of 14 mm diameter.
• Overall height 35 mm with a formed hub for the transition to the pipe.
• Material 1.4571 for the choice by medium and surroundings.

Applications

In plant that is opened often the DN 10 joint gives access to the line without touching the weld.

Standards and conformity

Dimensions and design follow DIN 2633 at a nominal pressure of PN 16.