Weld neck flange, DN 80, PN 16, pipe 88.9 mm, DIN 2633 and EN 1092-1 (type 11), black steel

Once installed, the weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. The article is made of black steel. The data give a pipe outside diameter of 88.9 mm and a flange outside diameter of 200 mm. The version is listed with the version to DIN 2633 and EN 1092-1 (type 11) and 8 bolt holes.

Benefits

• Nominal size DN 80 at a nominal pressure of PN 16 to DIN 2633 and EN 1092-1 (type 11).
• Welding end of 88.9 mm outside diameter and 3.2 mm wall thickness.
• Flange outside diameter 200 mm on a bolt circle of 160 mm.
• 8 bolt holes of 18 mm diameter.
• Overall height 50 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

On pumps and valves the bolt circle of 160 mm matches the counter flange to DIN 2633 and EN 1092-1 (type 11).

Standards and conformity

The version complies with DIN 2633 and EN 1092-1 (type 11), the bolt circle is 160 mm with 8 holes.