S2V series valve terminal, 4 stations 5/2-way, CC-Link, G 1/8 top ports - E.MC

Instead of wiring each solenoid separately, the terminal joins the CC-Link network as a single node. It carries 4 single-solenoid 5/2-way valves with about 700 l/min per station and keeps the overall length to 136.5 mm.

Advantages

• Low heat load in the cabinet at 0.8 W per solenoid, with an LED for every switching state.
• Mounts on a DIN rail or with screws and runs on filtered air without a lubricator.
• CC-Link right on the valve block: bus via M12 plug and M12 socket, 5-pin, A-coded, power via M12, 5-pin, A-coded. The bus module draws less than 50 mA.
• Diagnostics for short circuit, wire break, reverse polarity and under- or overvoltage, with a configurable safe output state on bus failure.
• G 1/8 outlets directly on the valves, easy to reach from above, 16 mm pitch.

Applications

• Compact assemblies such as grippers, clamping or lifting units with up to 4 double-acting cylinders.
• Existing CC-Link installations that are extended with additional pneumatic axes.
• Open DIN rail installation where hoses are plugged in and checked from above.