Valve terminal connection box without jump module, 6 stations, 24 V DC, IP 40, with LED display

This connection box forms the electrical part of a modular valve terminal and holds six stations. Instead of wiring every solenoid coil separately, one multi-pin cable carries all signals to the controller, and a fully equipped system can address up to 22 valves. The version without a jump module occupies the stations consecutively. Every station has an LED for the switching state and protective circuitry. At 24 V DC one station draws 2.5 W, the protection class is IP 40 and the footprint measures 135 x 123 mm.

Benefits

• 6 stations connected through one multi-pin cable, up to 22 valves per system
• LED status indication and protective circuitry on every station
• Power consumption of only 2.5 W per station at 24 V DC
• Voltage tolerance of ± 10 % from the nominal value
• Compact footprint of 135 x 123 mm
• Modular system that allows single valves to be exchanged

Applications

• Central valve islands in assembly and handling systems
• Packaging machines with six pneumatic sub-functions
• Installation close to the control cabinet, as IP 40 requires a dry location
• Test rigs that drive several cylinders from one 24 V DC controller
• Plants that are extended station by station over time

Standards and conformity

The connection box reaches protection class IP 40. The control voltage may deviate by ± 10 % from the nominal 24 V DC.