S1V series valve terminal, 10 x 5/2-way single solenoid, M5 side ports, CC-Link - E.MC

With 10 stations, this terminal runs a complete handling station over a single bus line. The integrated CC-Link module takes switching commands straight from the controller, and every station carries a single-solenoid 5/2-way valve drawing 0.8 W. The M5 working ports are on the side of the base.

Advantages

• CC-Link connection: M12 plug and M12 socket, 5-pin, A-coded, bus module current below 50 mA
• 11.5 mm pitch: 10 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions
• Service life: at least 40 million cycles, response under 15 ms, no lubrication required
• Diagnostics: reports short circuit, open load, reverse polarity, under- and overvoltage, with a configurable output state on bus failure

Applications

• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Decentralised valve manifold mounted on the machine and linked to the controller via CC-Link instead of discrete wiring
• Installations with limited height where the tubing should leave sideways
• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. Matching M12 cables are available for the bus line and the power supply.