Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pneumatically actuated shut-off valve G1/4, M8 sensor VBOC-L2-E-S7-P-M8-G14-E - Festo 8177461
The pneumatically actuated VBOC-L2-E-S7-P-M8-G14-E shut-off valve blocks the air supply in its normal position, and an inductive sensor reports this position. At a glance: port G1/4, operating pressure 0.5 to 10 bar, pilot pressure 2 to 10 bar. Weight 125 g.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
0.5 to 10 bar operating pressure: the pneumatically actuated VBOC-L2-E-S7-P-M8-G14-E shut-off valve blocks the air supply in its normal position, and an inductive sensor reports this position. An exhaust air one-way flow control function is integrated as well.
Benefits
- Pressure range: 0.5 to 10 bar operating pressure, pilot pressure 2 to 10 bar
- Connections: G1/4, pilot air 12: G1/8
- Position sensing: inductive sensor, M8x1, A-coded to EN 61076-2-104, 10 to 30 V
- Switching times: on 14 ms, off 25 ms
- Paint compatibility: LABS conformity VDMA24364 zone III
- Battery production: suitable with reduced Cu/Zn/Ni values (F1a)
Applications
Used to shut off the compressed air supply with feedback of the valve position to the controller. Operating medium: compressed air to ISO 8573-1:2010 [7:4:4]. Mounting: screw-in, with male thread. Once lubricated, lubrication must continue.
Technical data
| Type | VBOC-L2-E-S7-P-M8-G14-E |
|---|---|
| Festo part number | 8177461 |
| Valve function | 2/2-way, normally closed, monostable |
| Additional function | Exhaust air one-way flow control function |
| Pneumatic connection, port 1 | G1/4 |
| Pneumatic connection, port 2 | G1/4 |
| Type of actuation | Pneumatic |
| Type of mounting | Screw-in, with male thread |
| Nominal flow rate in flow control direction (to ISO 8778) | 360 l/min |
| Nominal flow rate in non-return direction (to ISO 8778) | 290 to 410 l/min |
| Standard flow rate in flow control direction (6 to 0 bar, to ISO 8778) | 650 l/min |
| Standard flow rate in non-return direction (6 to 0 bar, to ISO 8778) | 620 to 740 l/min |
| Operating pressure | 0.5 to 10 bar |
| Ambient temperature | -5 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| CE marking (see declaration of conformity) | To EU EMC Directive, to EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS regulations |
| Mounting position | Any |
| Additional function 2 | Manual exhaust |
| Special characteristics | Resistant to welding spatter |
| Type of seal on screw-in stud | Sealing ring |
| Manual override | Detenting |
| Type of reset | Mechanical spring |
| Pilot air supply | External |
| Manual exhaust function | Non-detenting |
| Measuring principle | Inductive |
| Switching element function | Normally closed contact |
| Rotatability | 360°, no continuous swivelling permitted |
| Reverse polarity protection, sensor | For all electrical connections |
| Note on forced dynamic operation | Current information on this topic is given in Technical Report V |
| Switching position sensing | Normal position with sensor |
| Switch-off pressure | 0.5 to 2 bar |
| Switch-on pressure | 1.5 to 4 bar |
| Pneumatic off range | 0.4 bar |
| Pilot pressure | 2 to 10 bar |
| Switch-off time | 25 ms |
| Switch-on time | 14 ms |
| Nominal operating voltage DC | 24 V |
| Switching output | PNP |
| Note on operating and pilot medium | Lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for Li-ion battery production | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Medium temperature | -5 to 60 °C |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Nominal tightening torque | 10 Nm |
| Tolerance for nominal tightening torque | ± 20 % |
| Permissible actuating torque, adjusting screw | 2 Nm |
| Product weight | 122 g |
| Operating voltage range DC, sensor | 10 to 30 V |
| Short-circuit protection, sensor | Yes |
| No-load current, sensor | 10 mA |
| Max. output current, sensor | 200 mA |
| Voltage drop, sensor | 3 V |
| Electrical connection 1, function | Switching output |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Electrical connection 1, number of pins/wires | 3 |
| Electrical connection 1, assigned pins/wires | 3 |
| Cable length | 0.3 m |
| Pilot air port 12 | G1/8 |
| Note on materials | RoHS-compliant |
| Material seals | HNBR, NBR, TPE-U(PU) |
| Material banjo bolt | Wrought aluminium alloy |
| Material cable sheath | PVC |
| Material knurled nut | Wrought aluminium alloy |
| Material adjusting screw | High-alloy stainless steel |
| Material swivel fitting | Wrought aluminium alloy |
| Material sensor bracket | High-alloy stainless steel |
| Material locking nut | High-alloy stainless steel |
| Weight (shipping) | 125 g |
| Weight | 0.125 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VBOC-L2-E-S7-P-M8-G14-E |
| EAN | 4052568628420 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Thread | G 1/4 |
| Seal material | HNBR, NBR, TPE-U(PU) |
| Medium | Compressed air |
| Function | 2/2 closed monostable |
| Actuation type | pneumatic |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | G1/4 |
| Temperaturbereich | -5-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






