UPS 12V and 5V for 12 V and 5 V DC devices, 1.3 Ah battery, 1-Wire UNI status, set with power adapter - HW group 600674

Routers, monitoring units and small controllers often run on 12 V and 5 V side by side. The UPS 12V and 5V backs up both voltages at once from a 1.3 Ah battery and passes the UPS state as 4 values straight to the monitoring system over 1-Wire UNI. The power adapter is part of the set.

Benefits

• Ready to install: the power adapter is included, no separate adapter needs to be sourced.
• Two voltages from one UPS: 12 V at up to 1.5 A and 5 V at up to 0.5 A are available simultaneously, the 5 V rail comes from an internal converter.
• Detailed status, not just a contact: the unit delivers 4 values over 1-Wire UNI (RJ11) to compatible HW group monitoring devices.
• Alert on mains failure: the connected device detects the outage immediately and can notify recipients or shut processes down cleanly.
• Status at a glance: Power IN and Power OUT LEDs.

Applications

• Backup power for monitoring devices and network gear in server rooms and 19-inch racks
• Power failure monitoring in plant rooms and distribution rooms
• Leak and temperature monitoring on liquid cooling that has to keep running during a mains outage
• Small PBX systems and controllers with 12 V and 5 V supplies

Compatibility

• All HW group devices powered by a 12 V or 5 V adapter
• HW group monitoring devices with a 1-Wire UNI port (RJ11) for status reporting
• If only a relay signal and 12 V are needed: UPS 12V (600664, set 600671)