Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 8.0x10 mm, wall 1.50 mm, plain steel

The spring pin to DIN 1481 and ISO 8752 secures components in a hole of 8.0 mm nominal size. Before fitting it measures 8.5 mm across and therefore carries 0.5 mm of interference, which becomes the holding force as it is driven in. It is 10 mm long, 1.50 mm thick in the wall and made from plain steel (black).

Benefits

• 0.5 mm of interference against the nominal size of 8.0 mm, the holding force is produced without a reamed hole
• wall thickness 1.50 mm to the heavy duty version of DIN 1481
• overall length 10 mm at 5.5 mm inside diameter before fitting
• outside diameter 8.5 mm before fitting, slotted and therefore springy
• plain spring steel, uncoated and therefore dimensionally true in the hole
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

It is fitted in conveyor technology and agricultural machinery to secure bolts and axles.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is plain steel (black).