Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 1.5x14 mm, wall 0.30 mm, stainless steel A2

The spring pin to DIN 1481 and ISO 8752 secures components in a hole of 1.5 mm nominal size. Before fitting it measures 1.8 mm across and therefore carries 0.3 mm of interference, which becomes the holding force as it is driven in. It is 14 mm long, 0.30 mm thick in the wall and made from stainless steel A2.

Benefits

• 0.3 mm of interference against the nominal size of 1.5 mm, the holding force is produced without a reamed hole
• wall thickness 0.30 mm to the heavy duty version of DIN 1481
• overall length 14 mm at 1.1 mm inside diameter before fitting
• outside diameter 1.8 mm before fitting, slotted and therefore springy
• stainless steel A2 for damp surroundings and frequent cleaning
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

The pin is called for as a locating pin between two components, as a stop and as a safeguard against twisting.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is stainless steel A2.