Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 10.0x14 mm, wall 2.15 mm, stainless steel A2

For removable joints without a reamed hole, this pin to DIN 1481 and ISO 8752 carries the nominal size 10.0 mm over 14 mm of length. Inside it measures 6.5 mm, the wall is 2.15 mm thick. The data sheet names stainless steel A2 as the material.

Benefits

• 0.8 mm of interference against the nominal size of 10.0 mm, the holding force is produced without a reamed hole
• wall thickness 2.15 mm to the heavy duty version of DIN 1481
• overall length 14 mm at 6.5 mm inside diameter before fitting
• outside diameter 10.8 mm before fitting, slotted and therefore springy
• stainless steel A2 for damp surroundings and frequent cleaning
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

It is used in equipment and apparatus construction as a bearing pin for rollers, levers and springs.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is stainless steel A2.