Terminal box with jump module for SF2000 valve terminal, 10 stations, 24 V DC, 25-pin D-Sub - YPC MCS221

On an SF2000 series valve terminal, the terminal box handles the entire electrical side. It takes up to 10 solenoid coils and routes them to a 25-pin D-Sub connector, so only one multipole cable runs from the controller to the terminal.

Advantages

• 10 stations on one 25-pin D-Sub connector, one multipole cable instead of single wires
• LED status indicator and protective circuit at every station
• 24 V DC, voltage tolerance ±10 %, power consumption 2.5 W per station
• Dovetail guide for the 10-station manifold, valves simply plug on and are screwed down

Applications

• Machines with several cylinders controlled centrally from the control cabinet
• Mixed population of single solenoid, double solenoid and 5/3-way valves on one manifold
• Fast commissioning, as only one multipole cable needs to be connected

Accessories and spare parts

On the pneumatic side, the terminal also needs the SF2000 series manifold with 10 positions. Every double solenoid or 5/3-way valve requires a connection plate for the second solenoid, and unused stations are closed with a blanking plate. Where vibration occurs, mounting plates secure the coils to the box. The multipole cable with D-Sub plug is available separately.