Images are examples, some edited with AI. The technical data are authoritative. AI notice
Magnetoresistive proximity sensor for T-slot NAMUR NAMUR 20 m cable with open end in-line outlet ATEX SDBT-MS-20NL-ZN-E-20-LE-EX6 - Festo 8185111
Detects the piston magnet without contact using the magnetoresistive principle and signals the cylinder position in drives with T-slot. Connection via 20 m cable with open end, cable suitable for energy chains, suitable for robots. A yellow LED shows the switching status directly on the sensor.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo magnetoresistive proximity sensor SDBT-MS-20NL-ZN-E-20-LE-EX6 senses end positions and intermediate positions on pneumatic cylinders and grippers and fits into the T-slot.
Benefits
- 0.2 mm repetition accuracy of the switching point
- Up to 330 Hz switching frequency
- Cable suitable for energy chains, suitable for robots, TPE-U(PUR) sheath
- In-line cable outlet, 20 m cable with open end
- IP65, IP68 protection, dust-tight and protected against continuous immersion
Applications
A common application is end position sensing on cylinders with magnetic pistons in assembly and handling systems. Mounting screwed tight, insertable into the slot from above.
Technical data
| Feature | Value |
|---|---|
| Type | SDBT-MS-20NL-ZN-E-20-LE-EX6 |
| Festo part number | 8185111 |
| Design | for T-slot |
| Based on standard | EN 60947-5-6 |
| Approval | RCM mark, c UL us - Listed (OL), c UL us - Listed (HazLoc) |
| CE mark (see declaration of conformity) | to EU EMC Directive, to EU Explosion Protection Directive (ATEX), to EU RoHS Directive |
| UKCA marking (see declaration of conformity) | to UK RoHS regulations |
| Explosion protection | Zone 0 (ATEX), Zone 0 (BR), Zone 0 (CA), Zone 0 (CN), Zone 0 (IEC-EX), Zone 0 (KR), Zone 0 (TW), Zone 0 (UKEX), Zone 0 (US), Zone 1 (ATEX), Zone 2 (ATEX), Zone 20 (ATEX), Zone 20 (BR), Zone 20 (CA), Zone 20 (CN), Zone 20 (IEC-EX), Zone 20 (KR), Zone 20 (TW), Zone 20 (UKEX), Zone 20 (US), Zone 21 (ATEX), Zone 22 (ATEX) |
| ATEX category gas | II 1G |
| Ex ignition protection type gas | Ex ia IIC T4...T6 Ga X |
| ATEX category dust | II 1D |
| Ex ignition protection type dust | Ex ia IIIC T135 °C Da, Zone 20, AEx ia IIIC T135 °C Da |
| Explosion protection certification outside the EU | EPL Ga (BR), EPL Ga (CA), EPL Ga (CN), EPL Ga (GB), EPL Ga (IEC-EX), EPL Ga (KR), EPL Ga (TW), EPL Ga (US) |
| Ex ambient temperature | T6, with fixed cable installation: -40 °C ≤ Ta ≤ +45 °C, T6: -20 °C ≤ Ta ≤ +45 °C |
| Max input voltage Ui | 28 V |
| Max input current Ii | 0.25 A |
| Max input power Pi | T4: 350 mW, T6: 72 mW |
| Effective internal inductance Li | 30 µH |
| Effective internal capacitance Ci | 79 nF |
| Certificate issuing authority | 21-AV4BO-0130X, 21-AV4BO-0131X, CSAE 22UKEX1322X, DNV 17.0027 X, IECEx PTZ 18.0008X, ML091200700NZ0, PTZ 16 ATEX 0010 X, UL E232949, UL E539825 |
| Special characteristics | oil-resistant |
| Note on materials | RoHS-compliant, halogen-free |
| Measured variable | position |
| Measuring principle | magnetoresistive |
| Ambient temperature | -40 to 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | NAMUR |
| Switching element function | NAMUR |
| Switch-on time | 1 ms |
| Switch-off time | 1 ms |
| Max switching frequency | 330 Hz |
| Off-state current | 0.4 to 1 mA |
| Rated operating voltage DC | 8.2 V |
| Operating voltage range DC | 7.5 to 18 V |
| Residual ripple | 10 % |
| Reverse polarity protection | for all electrical connections |
| Electrical connection, connection type | cable |
| Electrical connection, connector system | open end |
| Electrical connection, number of pins/wires | 2 |
| Connection outlet direction | in-line |
| Cable test conditions | bending strength to Festo standard, test conditions on request |
| Cable length | 20 m |
| Cable characteristic | suitable for energy chains, suitable for robots |
| Cable sheath colour | blue |
| Cable sheath material | TPE-U(PUR) |
| Material insulating sheath | PP |
| Wire ends | wire ferrule |
| Type of mounting | screwed tight, insertable into the slot from above |
| Tightening torque | 0.1 to 0.6 Nm |
| Max tightening torque | 0.6 Nm |
| Mounting position | any |
| Housing colour | black |
| Housing material | reinforced PA, high-alloy stainless steel |
| Switching status indication | yellow LED |
| Ambient temperature with moving cable | -20 to 85 °C |
| Degree of protection | IP65, IP68 |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Weight | 0.24 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SDBT-MS-20NL-ZN-E-20-LE-EX6 |
| EAN | 4052568631550 |
| Zolltarifnummer | 85365019 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Colour | Black |
| Series | SDBT |
| Protection rating | IP65 |
| Temperature (max.) | 85 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






