Straight bulkhead weld coupling, tube 30 S, socket 50 mm, phosphated steel

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. The data also state a temperature range of -40 to +120 °C. This version comes with tube outside diameter 30 S and weld socket 50 mm.

Benefits

• The weld socket of 50 mm diameter is welded into the wall and carries the coupling.
• Tube 30 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 400 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 30 S outwards through the welded 50 mm socket.