Pressure Reducing Valve 3DREE6-2X/200G24K31A1BM - Bosch Rexroth R901567617

A 0...10 V voltage command sets the reduced pressure here, while the maximum operating pressure is fixed at 315 bar. At flows of up to 60 l/min the controlled pressure stays where it was set, even as the consumer changes its load.

Benefits

• 0...10 V command input that matches the analog outputs of common controllers
• Maximum operating pressure of 315 bar at flows of up to 60 l/min
• Pilot-operated design with on-board electronics on the valve
• Two switching positions, four ports, spool symbol P to A
• Weight of 3.04 kg, NBR seals for HL hydraulic fluid

Applications

The valve suits presses, clamping systems and test rigs in which one circuit runs at a changing reduced pressure. The command can be ramped inside the cycle, so contact pressure and holding pressure come from the same assembly. Subplate mounting to ISO 4401-03-02-0-05 allows a swap without reworking the piping.

Manufacturer

Bosch Rexroth builds the valve under material number R901567617, type code 3DREE6-2X/200G24K31A1BM.