Pressure Reducing Valve DREM20-6X/315YG24-8K4V - Bosch Rexroth R901279591

A branch circuit with lower pressure demand cannot sensibly be run on main pressure. The DREM20-6X/315YG24-8K4V pressure reducing valve in size 25 lowers pressure to the electrically commanded value and handles up to 300 l/min.

Benefits

• Command value set electrically through external electronics, supply voltage 24 VDC.
• Maximum operating pressure 315 bar at flows up to 300 l/min.
• Connection diagram ISO 5781 with subplate mounting and three ports.
• FKM seals for HL hydraulic fluid, symbol B to A.
• Connector 3-pole (2 + PE) according to EN 175301-803 with protective earth.
• 5.93 kg mass, size 25, two switching positions.

Applications

The valve feeds clamping and feed circuits whose pressure has to sit below that of the main circuit. Since the command value comes from the controller, reduced pressure can be changed during the cycle. Subplate mounting to ISO 5781 allows replacement without changing the piping.

Manufacturer

Bosch Rexroth, material number R901279591. All further data is given in data sheets RE 29276 and RE 07600-B. External amplifier electronics are required for operation.