Pressure Reducing Valve 3DREE16P-7X/50XYG24K31A1V - Bosch Rexroth R901363067

Grippers, thin sheet tooling and sealing faces take damage when the full system pressure reaches them. The 3DREE16P-7X/50XY holds the branch pressure from P to A at the electrically set value and corrects deviations on its own. It passes up to 300 l/min maximum flow and is built for operating pressures up to 315 bar.

Benefits

• Electrically corrected pressure reduction from P to A, 0...10 V command value
• Up to 300 l/min maximum flow in size 16
• Operating pressure up to 315 bar, hole pattern ISO 4401-07-07-0-05
• Two switching positions, four ports, on-board electronics at the valve
• 24 VDC supply through a 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 10.22 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve is wanted on handling grippers, embossing stations and joining units whose tooling works at far less pressure than the main circuit. A 0...10 V command connects to a plain analogue output module. Which pressure range the build covers follows from the type designation 3DREE16P-7X/50XYG24K31A1V.

Manufacturer

Bosch Rexroth lists this valve under material number R901363067.