Prop-Druckventil-Z Z3DREE10VP2-1X/100LMSG24K31F1M - Bosch Rexroth R901541576

One branch of a manifold has to be held at 100 bar regardless of system pressure. The Z3DREE10VP2-1X/100LMSG24K31F1M does this as a pilot-operated proportional pressure reducing valve in sandwich plate design, following a 4...20 mA command value and rated for 120 l/min.

Benefits

• 100 bar pressure rating as the controlled set point, while the manifold itself may run up to 350 bar.
• Sandwich plate design to ISO 4401-05-05-0-05, the stack grows by one plate and the piping stays as it is.
• 120 l/min flow across 4 ports and 3 switching positions.
• On-board electronics on 24 VDC, command value 4...20 mA through a 7-pole (6 + PE) connector to EN 175201-804.
• Pressure measuring port on the valve, so the setting can be checked without an extra measuring block.

Applications

Suited to size 10 manifolds where clamping, hold-down or feed axes work at reduced pressure. The control loop follows the current signal from the machine control, so the level can be changed during a cycle. NBR seals and HL fluid cover the usual machine building case.

Manufacturer

Bosch Rexroth, material number R901541576, product family Z3DRE(E)10. Further data is listed in data sheets Proportional pressure reducing valve (RE 29282) and Hydraulic valves and hydro- (RE 07600-B).