Pressure Reducing Valve 3DREE16P-7X/200XYG24K31F1V - Bosch Rexroth R901453388

In large plants the run from the cabinet to the hydraulic block is often long. The 3DREE16P-7X/200XY therefore takes the command value as a 4...20 mA current signal, which does not decay over distance and shows a broken wire as a reading below 4 mA. Pressure reduction runs from P to A at up to 300 l/min maximum flow and 315 bar.

Benefits

• 4...20 mA command value, immune to voltage drop on long cable runs
• Pressure reduction from P to A, two switching positions, four ports
• Up to 300 l/min maximum flow, operating pressure up to 315 bar
• Size 16 with subplate mounting to ISO 4401-07-07-0-05
• On-board electronics, 24 VDC supply through a 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 9.75 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve is intended for widely branched plants such as press lines, test fields and foundry equipment where the valve block and the controller are physically apart. A current command can be routed over existing cable ways without the set pressure drifting. Compare type designation and pressure range with the old valve when replacing.

Manufacturer

The Bosch Rexroth material number is R901453388.