Pressure Reducing Valve DREME10-6X/100YMG24K31F1M - Bosch Rexroth R901319548

A branch running at about 100 bar on a plant that works up to 315 bar needs pressure control of its own. The DREME10-6X/100YMG24K31F1M is built for that stage, follows the 4...20 mA current command and releases up to 300 l/min.

Benefits

• 100 bar pressure stage, fine resolution in the lower range of a 315 bar system
• 4...20 mA current command, a broken wire stays visible in the signal
• Flow up to 300 l/min across three ports to ISO 5781
• On-board electronics at 24 VDC, wired through a 7-pole (6 + PE) plug to EN 175201-804
• 4.98 kg, NBR seals, HL hydraulic fluid, two switching positions

Applications

Typical places of use are clamping circuits, lubrication and cooling loops and feed axes working well below system pressure. The valve sits on a size 10 subplate and needs no external amplifier. The command value comes straight from the machine controller.

Manufacturer

Bosch Rexroth, material number R901319548. Characteristic curves and installation dimensions are given in data sheet RE 29276.