Pressure Reducing Valve DREE10-6X/315YG24K31A1V - Bosch Rexroth R901279568

A power unit feeds several consumers, one of which may see markedly less pressure. The DREE10-6X/315YG24K31A1V separates that level and controls it from a 0...10 V voltage command value, in size 10 at 4.88 kg.

Benefits

• Reduced pressure follows the 0...10 V signal issued by the machine controller.
• Connection diagram ISO 5781 in size 10, exchangeable without repiping.
• Flow up to 300 l/min at a maximum operating pressure of 315 bar.
• FKM seals, hydraulic fluid HL, 4.88 kg.
• 7-pole connector (6 + PE) to EN 175201-804, 24 V DC supply.

Applications

The valve sits in a branch of the machine hydraulics and holds a lower pressure level there than the main circuit. Typical duties are clamping and holding steps where the force changes during the cycle. The reduced pressure can be driven from the controller.

Manufacturer

Bosch Rexroth lists this valve under material number R901279568. Characteristic curves, installation dimensions and tightening torques are in data sheet RE 29276.