Pressure Reducing Valve DREM10-6X/50YMG24K4V - Bosch Rexroth R901395820

A branched part circuit should run at its own electrically set pressure while the main circuit stays at full level. The DREM10-6X/50YMG24K4V controls that reduced pressure from B to A and passes up to 300 l/min while doing so.

Advantages

• Stepless pressure setting through external electronics, so the reduced pressure follows the command value from the controller.
• Flow of up to 300 l/min at a maximum operating pressure of 315 bar in size 10.
• Three ports with pressure reduction from B to A, suited to branched part circuits.
• FKM seals for plants running at raised oil temperature.
• Connection diagram to ISO 5781, weight of 4.82 kg and a 24 VDC supply.

Application

The valve is used in clamping and pressing circuits where the pressure is changed several times during a cycle. It mounts on a subplate to ISO 5781 and is driven by external amplifier electronics. Hydraulic fluid HL remains the basis of the layout.

Manufacturer

Bosch Rexroth lists the version under material number R901395820. Detailed characteristic curves and installation dimensions are given in the data sheet Proportional pressure reducing (RE 29276), Hydraulic valves and hydro- (RE 07600-B).