Pressure Reducing Valve 3DREME10P-7X/315XYG24K31A1V - Bosch Rexroth R901252139

In plants with strongly fluctuating system pressure it is better to draw the pilot oil from a circuit of its own so the pilot stage stays steady. The 3DREME10P-7X/315XY build is laid out for that with external pilot oil supply and external drain. It reduces the pressure from P to A along a 0...10 V command value at up to 300 l/min maximum flow and 315 bar operating pressure.

Benefits

• External pilot oil supply and external drain, the control oil can be filtered and protected separately
• Pressure reduction from P to A along a 0...10 V command value
• Up to 300 l/min maximum flow in size 10
• Operating pressure up to 315 bar, hole pattern ISO 4401-05-05-0-05, four ports
• FKM seals for HL hydraulic fluid, 8.12 kg unit weight
• On-board electronics, 24 VDC supply, 7-pole connector (6 + PE) to EN 175201-804

Application

The build suits plants where system pressure swings strongly or several consumers start at once, for example press blocks and test fields. A separate control oil circuit with a fine filter keeps the pilot stage clean and the set pressure steady. When replacing, compare hole pattern, pressure range and pilot arrangement with the old valve.

Manufacturer

The Bosch Rexroth material number is R901252139.