Pressure Reducing Valve DREME10-6X/315YG24K31A1V - Bosch Rexroth R901321378

A reduced pressure in a secondary circuit has to follow the setpoint even when the main circuit fluctuates. The DREME10-6X/315YG24K31A1V accepts the setpoint as a 0 to 10 V analogue signal and holds the outlet pressure up to 315 bar, at a flow of up to 300 l/min.

Benefits

• Setpoint given as an analogue 0 to 10 V signal, converted into pressure by the on-board electronics.
• 315 bar maximum operating pressure at 300 l/min flow in size 10.
• Connection pattern to ISO 5781 for subplate mounting, three ports and two switching positions.
• Spool symbol B to A, supplied with 24 VDC through a 7-pole connector (6 + PE) to EN 175201-804.
• FKM seals and HL hydraulic fluid, UKCA conformity for electromagnetic compatibility SI2016/1091.

Applications

The valve suits tools, clamping units or feed drives that run at a lower pressure level than the main circuit. The analogue signal lets the pressure be changed during the running process, for example between rapid and working stroke. Because the electronics sit on the valve, a separate controller card in the cabinet is not needed.

Manufacturer

Bosch Rexroth, material number R901321378. Characteristic curves, port dimensions and control details are given in the valve data sheet.