Pressure Reducing Valve DREME10-6X/50YG24K31A1M - Bosch Rexroth R901298569

Where the control system already offers a 0...10 V analog output card, the reduced pressure can be set without any extra signal converter. The DREME10-6X/50YG24K31A1M accepts that voltage signal, works on the 50 bar rating, carries up to 300 l/min.

Benefits

• Command value 0...10 V, driven straight from a common analog output card
• 50 bar pressure rating for clamping as well as holding duties at low contact pressure
• Maximum flow 300 l/min, maximum operating pressure 315 bar
• Subplate mounting to ISO 5781, size 10, 3 ports
• On-board electronics at 24 VDC, 7-pole connector (6 + PE) to EN 175201-804
• Spool symbol B to A, NBR seals, weight 5.84 kg

Application

The valve suits clamping fixtures, back stops as well as feed units whose contact pressure stays below 50 bar. The value comes from the control system, so no mechanical readjustment at the valve is needed. HL hydraulic fluid, weight 5.84 kg.

Manufacturer

Bosch Rexroth, material number R901298569, type designation DREME10-6X/50YG24K31A1M. Further values are given in the data sheet Proportional pressure reducing (RE 29276) and Hydraulic valves and hydro- (RE 07600-B).