Pressure Reducing Valve 3DREE16P-7X/100YG24K31A1V - Bosch Rexroth R901263447

Not every machine has an analogue module with a current output. The 3DREE16P-7X/100Y build therefore works with a 0...10 V voltage command of the kind small controllers and compact units supply as standard. Pressure is reduced from P to A, pilot oil is drained externally, and up to 300 l/min maximum flow at 315 bar is permitted.

Benefits

• 0...10 V command value, usable at common analogue outputs without a converter
• Pressure reduction from P to A with an external pilot oil drain
• Up to 300 l/min maximum flow in size 16
• Operating pressure up to 315 bar, hole pattern ISO 4401-07-07-0-05
• On-board electronics, 24 VDC, 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 9.9 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve serves compact power units, special purpose machines and test set-ups with modest control equipment. A voltage command needs no burden resistor and can be wired directly. For valve blocks far from the cabinet, a 4...20 mA build is the better choice.

Manufacturer

The Bosch Rexroth material number is R901263447.