Pressure Reducing Valve DREM10-6X/100YG24-8K4V - Bosch Rexroth R901279575

The narrower the pressure stage of a proportional valve, the smaller the pressure window across which the full command value range is spread. The DREM10-6X/100YG24-8K4V uses stage 100 from its type code and thus controls branch circuits that stay well below the maximum operating pressure of 315 bar.

Benefits

• Pressure stage 100 in the type code, the command value range is spread across a correspondingly narrow pressure window.
• Electrical control with external electronics, pressure is commanded from the controller rather than set at the valve.
• Up to 300 l/min across three ports, two switching positions, acting from B to A.
• Size 10 to port pattern ISO 5781, subplate mounting in the manifold.
• FKM seals for HL hydraulic fluid, supply voltage 24 VDC.
• 4.8 kg, 3-pole connector (2 + PE).

Technical data

Applications

Valves like this sit in contact-force, infeed and counter-holding circuits where small forces have to be hit accurately. Since the command value comes from the controller, pressure is part of the program and can be changed at a product changeover without tools. Subplate mounting to ISO 5781 allows exchange within size 10 without altering the piping.

Manufacturer

Bosch Rexroth, material number R901279575, product family DRE(M)(E)10,20. Command value curves and installation notes are found in data sheet RE 29276, the range overview in RE 07600-B.