Pressure Reducing Valve 3DREE16P-7X/50YG24K31F1V - Bosch Rexroth R901246373

A test program usually asks for smooth transitions, not jumps. The 3DREE16P-7X/50Y build follows a 4...20 mA current command and reduces the pressure from P to A along the given ramp. Pilot oil is drained externally, and up to 300 l/min maximum flow at 315 bar operating pressure is permitted.

Benefits

• 4...20 mA command value, suited to ramps from the test program
• Pressure reduction from P to A with an external pilot oil drain
• Up to 300 l/min maximum flow in size 16
• Operating pressure up to 315 bar, hole pattern ISO 4401-07-07-0-05, four ports
• On-board electronics, 24 VDC supply, 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 10.26 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve fits materials and component test rigs, leak testing and endurance installations where pressure has to follow a programmed profile. A current command stays stable over long cables and in noisy surroundings. Which pressure range applies can be read from the type designation 3DREE16P-7X/50YG24K31F1V.

Manufacturer

The Bosch Rexroth material number is R901246373.