Polyamide tube PA, diameter 4 x 2.7 mm, yellow, cut length from a 50 m roll, working pressure 26 bar

Once installed, the polyamide tube carries compressed air, hydraulic oil and fuel in a semi-rigid, kink-resistant design. The data sheet gives a working pressure of 26 bar. The stated figures are diameter 4 x 2.7 mm. Also stated are colour yellow and supply form cut length from a 50 m roll.

Benefits

• Working pressure 26 bar at a diameter of 4 x 2.7 mm.
• Minimum bending radius 19 mm, semi-rigid and kink-resistant.
• Temperature range -60 to +130 °C as per the data sheet.
• Shore hardness 65 D with good mechanical resistance and chemical resistance.
• Suitable for vacuum applications and for use in drag chains.

Applications

The tube is routed in compressed air lines, air brake lines, hydraulic lines and fuel lines with a working pressure of up to 26 bar.