Polyamide tube PA, diameter 12 x 10 mm, blue, cut length from a 50 m roll, working pressure 12 bar

Once installed, the polyamide tube carries compressed air, hydraulic oil and fuel in a semi-rigid, kink-resistant design. The data also state a minimum bending radius of 67 mm. The stated figure is a working pressure of 12 bar. In addition the data give colour blue and supply form cut length from a 50 m roll.

Benefits

• Working pressure 12 bar at a diameter of 12 x 10 mm.
• Minimum bending radius 67 mm, semi-rigid and kink-resistant.
• Temperature range -60 to +130 °C as per the data sheet.
• Shore hardness 65 D with good mechanical resistance and chemical resistance.
• Suitable for vacuum applications and for use in drag chains.

Applications

In air brake lines and hydraulic lines the tube can be routed down to a bending radius of 67 mm without kinking.