Did you know? 1-2 %

Compressed air lines are laid with a fall, one to two percent being usual. Take offs rise from the top so condensate does not run into the consumers.

Browse line connectors

Pipe clamps

Hydac pipe clamps, heavy series

Pipe clamps of the heavy series to DIN 3015-2 for tube outside diameters of 6 to 66 mm, 151 versions. Against the light series the heavy body is taller and takes higher line loads.

The range covers plastic clamps with weld plate, with extended weld plate plus cover plate, with cover plate and rail nuts for C rail assembly, and aluminium clamps with weld and cover plate. Clamp sizes run from 1 to 5.

151 items
1 manufacturer
Net prices plus VAT

View as Grid view List view

Show

per page

Buying guide

How to choose Hydac pipe clamps, heavy series

What matters when choosing: properties, comparison and typical applications.

Technical features

⚡DIN 3015-2 - heavy series, 151 versions held in this category

📏Tube 6 to 66 mm - including 13.7, 17.1, 21.3, 26.9, 33.7, 48.3, 60.3, 65 and 66 mm

⚙Clamp sizes 1 to 5 - graded by tube diameter, size 5 taking 66 mm tube

🔧Materials - plastic clamp body or aluminium, both with steel mounting parts

🌡Assembly - weld plate, long weld plate, cover plate or C rail

Applications

The heavy series is routed on hydraulic power units, presses and construction plant where pressure surges set pipework moving.

Cover plate and weld plate build a positive tie into the machine frame. Matching clamp jaw pairs of the same standard allow the clamp body to be replaced without removing the base plate.