Pipe clamps

Hydac pipe clamps with elastomer insert

Heavy series pipe clamps to DIN 3015-2 with an elastomer insert, 75 versions for tube outside diameters of 6 to 140 mm. The insert damps structure borne noise and takes up dimensional deviation on the tube.

The range covers plastic clamps with weld plate as well as with weld and cover plate. Clamp sizes run from 2 to 7 and reach large diameters such as 101, 108, 114 and 133 mm.

  • 75 items
  • 1 manufacturer
  • Net prices plus VAT
View as Grid view List view

Items 1-24 of 75

Set Descending Direction
per page
  1. Pipe clamp with elastomer insert, size 4, pipe 48 mm, weld plate
    €37.60
Page

Buying guide

How to choose Hydac pipe clamps with elastomer insert

What matters when choosing: properties, comparison and typical applications.

Technical features

⚡Tube 6 to 140 mm - including 17.2, 26.9, 45.5, 53.4, 56.4, 83, 89, 94 and 133 mm
📏Clamp sizes 2 to 7 - size 7 accepts tube around 133 mm
⚙Elastomer insert - damps vibration and protects the tube surface
🔧Assembly - plastic clamp with weld plate, optionally with an added cover plate

Applications

Damped clamps are set on pump lines, compressors and hydraulic power units where pulsating pressure carries noise into the frame.

The soft insert absorbs dimensional deviation as well as thermal expansion of the tube. Dimensions and plates follow the standard DIN 3015-2 build, so both types sit on the same base plate.