PVC-U ball valve, pneumatic actuator, DN 25, double acting, female thread, FKM seal

In use, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. The data also state a nominal pressure range of 0 - 16 bar. Its rating is a flow rate of 700 l/min. In addition the data give a double acting actuator and the connection female thread, FKM seal.

Benefits

• Nominal size DN 25 with a flow rate of 700 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 106 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator double acting with a control pressure of 6 to 10 bar.
• Connection female thread, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 106 mm installation length and the connection female thread, FKM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.