PVC-U ball valve, pneumatic actuator, DN 50, double acting, solvent socket, EPDM seal

In use, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. This version is listed with nominal size DN 50, solvent socket of 63 mm inside diameter and installation length 172 mm. Decisive for the selection is a flow rate of 3200 l/min. In addition the data give a double acting actuator and the connection solvent socket, EPDM seal.

Benefits

• Nominal size DN 50 with a flow rate of 3200 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 172 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator double acting with a control pressure of 6 to 10 bar.
• Connection solvent socket, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water treatment the DN 50 valve shuts off a line carrying 3200 l/min.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.