Elastomer expansion joint, flange connection DN250-PN10 (DIN/EN), bellows in EPDM

Once installed, the expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. This version is listed with a face-to-face length of 175 mm and a flange outside diameter of 395 mm. Its rating is a nominal size of DN 250. In addition the data give the DN250-PN10 (DIN/EN) flange connection.

Benefits

• Nominal size DN 250 on flange connection DN250-PN10 (DIN/EN) at a working pressure of 0 - 10 bar.
• Axially the bellows takes 45 mm of compression and 15 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 7 degrees.
• Bellows in EPDM with a synthetic fabric carrier, permitted up to max. +90 °C.
• Face-to-face length 175 mm at 25 mm flange thickness and 395 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In plant engineering the joint on connection DN250-PN10 (DIN/EN) takes up an offset of up to 15 mm.