Elastomer expansion joint, flange connection DN25-PN16 (DIN), bellows in EPDM

The expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. It is supplied with a face-to-face length of 100 mm and a flange outside diameter of 115 mm. The article is made of EPDM. The version is listed with the DN25-PN16 (DIN) flange connection.

Benefits

• Nominal size DN 25 on flange connection DN25-PN16 (DIN) at a working pressure of -1 to 16 bar.
• Axially the bellows takes 20 mm of compression and 10 mm of extension.
• Lateral offset up to 10 mm and angular deflection up to 25 degrees.
• Bellows in EPDM with a synthetic fabric carrier, permitted up to max. +90 °C.
• Face-to-face length 100 mm at 16 mm flange thickness and 115 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In plant engineering the joint on connection DN25-PN16 (DIN) takes up an offset of up to 10 mm.