Elastomer expansion joint, flange connection DN200-PN10 (DIN/EN), bellows in EPDM

This expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. The stated material is EPDM. The data state a nominal size of DN 200. This version is supplied with the DN200-PN10 (DIN/EN) flange connection.

Benefits

• Nominal size DN 200 on flange connection DN200-PN10 (DIN/EN) at a working pressure of 0 - 10 bar.
• Axially the bellows takes 45 mm of compression and 15 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 8 degrees.
• Bellows in EPDM with a synthetic fabric carrier, permitted up to max. +90 °C.
• Face-to-face length 175 mm at 25 mm flange thickness and 340 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In plant engineering the joint on connection DN200-PN10 (DIN/EN) takes up an offset of up to 15 mm.