Elastomer expansion joint, flange connection DN150-PN16 (DIN/EN), bellows in NBR

The expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. In addition the sheet lists a working pressure of 0 - 16 bar. Its rating is a nominal size of DN 150. The version is listed with the DN150-PN16 (DIN/EN) flange connection.

Benefits

• Nominal size DN 150 on flange connection DN150-PN16 (DIN/EN) at a working pressure of 0 - 16 bar.
• Axially the bellows takes 40 mm of compression and 10 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 12 degrees.
• Bellows in NBR with a synthetic fabric carrier, permitted up to max. +90 °C.
• Face-to-face length 150 mm at 22 mm flange thickness and 285 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In plant engineering the joint on connection DN150-PN16 (DIN/EN) takes up an offset of up to 15 mm.