Elastomer expansion joint, flange connection DN200-PN10 (DIN/EN), bellows in EPDM (high temperature)

The expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. The article is made of EPDM (high temperature). The data give a face-to-face length of 175 mm and a flange outside diameter of 340 mm. The version is listed with the DN200-PN10 (DIN/EN) flange connection.

Benefits

• Nominal size DN 200 on flange connection DN200-PN10 (DIN/EN) at a working pressure of 0 - 10 bar.
• Axially the bellows takes 45 mm of compression and 15 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 8 degrees.
• Bellows in EPDM (high temperature) with a steel cord carrier, permitted up to max. +110 °C.
• Face-to-face length 175 mm at 25 mm flange thickness and 340 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In heating and cooling circuits the bellows in EPDM (high temperature) takes up the length change of 45 mm.